Shelf Review: AOTC Blu-Ray Commemorative Pack Anakin Skywalker

Re-Armed in the Arena

Shelf Review! Not as in-depth as my regular musings, but a look at the equally-deserving items on my toy shelf all the same. This time round it's the turn of AOTC Anakin Skywalker from the Blu-Ray Commemorative four pack. How does he stack up? Read on to find out...

The Padawan Menace

Now, Attack of the Clones is a mess of a film, and is by far the worst entry into the Star Wars canon. Even with a re-edit (which it sorely needs, given how flabby it is) there's still more bad than good there. However, some of the good bits are great, are amongst them I'm going to include the costume designs. Anakin's costume is a unique and stylish take on the Jedi garb that echoes the costume later worn by Luke in ROTJ. As the look of a Jedi adventurer it works fine, and if you can get past the whiny, emo character wearing it (CW and EU do a much better job of representing Anakin to my eyes) it makes for a good look.

Face Front

That costume is well recreated here, and it makes for an equally stylish figure. The faux-leather robe looks great, even if it does feel a little flimsy, and there's even a soft goods skirt below the belt. Articulation-wise, there's a ball-jointed head, shoulders, elbow and knees, with swivel hands, waist and thighs. The legs are solid below the knee which works fine for me, as ball-jointed ankles usually look a bit... unnatural.

...And Back

The figure has all the articulation it needs for the toy shelf, and other than slightly bulbous elbows it maintains an accurate overall silhouette. As an Episode II Anakin however, I wouldn't go as far as to call this release definitive, even if it does fly pretty close.

Bare minimum, Baby.

The main issue is the lack of accessories. For a multipack figure that's not so much of a problem, but if this were on a single card I'd be annoyed by there being no mechanical replacement for the removable right arm, or spare lightsaber hilt to plug into the port on the belt. The original release of this figure, a Revenge of the Sith Evolutions multipack, included both of these parts. It doesn't kill this Anakin's appeal, but it doesn't feel complete either.

Not a good day to be a Tusken on the toyshelf...

In conclusion, this figure is a decent iteration of AOTC Anakin, and he stands proud in my collection as the single best Episode II figure I own. Given my disdain for the film that's not saying much, but this is a good toy nonetheless. All the same though, if you do have a Padawan-shaped hole in your collection, perhaps you should be looking to pick up this newer take from Hasbro's upcoming Black Series:

2013 Black Series AOTC Anakin Skywalker

Looks good to me, and there's a mechanical hand in there too...

Thanks for reading!

VC103: 'Realistic' Clone Wars Obi-Wan Kenobi Review

Knight of the not-as-old Republic!

A Clone Wars Obi-Wan would've been slightly less enthusiastically received by me at 8 years old than a Clone Wars Anakin Skywalker, but only slightly - that's not to take anything away from Sir Alec Guiness' depiction of Old Ben, but more so about the mystery of the man who became Darth Vader. Anyway, whilst the Prequels did whatever they did to the Star Wars franchise, one positive was that by Revenge of the Sith, Ewan McGregor had finally got a handle on how to play Obi Wan Kenobi, which in turn gave the film its more enjoyable moments. Following on from how good the Vintage Collection Clone Wars Anakin Skywalker was, this seemed like an appropriate purchase...

The Packaging

VC103

The packaging follows the standard Vintage Collection template, with the Clone Wars TV series logo in the place of the episode title. The picture is of Clone Wars-armoured Obi Wan Kenobi with a Ewan McGregor likeness in a pretty nifty Geonosis-esque war zone - clones and a Republic Gunship fill the dusty background. I like this; it's more exciting than the Anakin Skywalker card, and even some of the pictures on the movie figure cards. As with all TVC figures it features the Kenner logo in the bottom left, and the back of the card is covered by a boring multi-lingual sticker.

As shown here, he's packed with a lightsaber and a lightsaber hilt. Pretty minimal, but short of a helmet I'm not really sure what else he could've come with.

The Good

General Kenobi & Troops

First and foremost, the sculpt is fantastic. As soon as I pulled it out of the blister I was impressed with the weight of the figure and the sturdiness of the joints (with the exception of the wrists, which I'll come to). Straight away I was able to get Obi-Wan into various Jedi-like poses, and as well as having great joint movement (the shoulder pads share the same under-the-armour trick as the Anakin figure), I was also able to get him to stand in those poses. I don't know if it's the weight of the figure or that it shares some SA Clone Trooper DNA in the legs, but it's really well balanced. 

I'm a fan of the Clone Wars character designs anyway, but I find this figure really visually appealing. It features the best integration of soft goods and sculpted robes I've seen yet with the skirt, which is trimmed and fixed perfectly to allow for full leg movement without billowing. The Republic Jedi crest on the shoulder pad is crisp and brings a nice dash of colour to the armour, which is otherwise splattered with war zone dust (presumably from the same locale as is featured on the cardback). The belt features two pouches and a port for the lightsaber hilt, something that was notably absent on Anakin.

Guardian of Peace and Justice...

The Bad

Easy Now...

When I've seen the figure online I've never been sure if it's boss-eyed or not - since getting it in hand, I've realised it all depends on your point of view, quite literally. The right is on the donk, but viewed from the left or straight on it's really not that noticeable. Since the head sculpt is in general very good (even going as far as to include his forehead bump), I'd say it's not a huge issue. For such an EU figure, I find the dust a bit scene specific, but that doesn't bother me too much - it's more the way it's been kind of slopped on in parts that I'm not as keen on.

As I noticed when I pulled it out of the packet, and again when fixing the lightsaber, the swivel wrists do feel quite weak and as such I'm going to avoid too many two-handed duelling poses. As these are bona-fide collectors pieces rather than simple toys (like there's really a distinction...) I think all but the most heavy handed should be OK; either way, I'm still going to be careful!

Ready for (Clone) War!

The Verdict

If you have a Clone Wars-era display, or any interest in the time frame between Episodes 2 & 3, then this is the Obi-Wan Kenobi for you. I gave the VC92 Anakin Skywalker figure a five star review and this guy's even better - that can only mean he also gets top marks.

*****

Outside the Rules

I've been working on some shot ideas for the The Rather Childish 2nd Annual Vintage Star Wars Action Figure Photo Contest (closes January 31st, there's still time!), and took the opportunity to use my lighting and set-up with a slightly newer guy...

Man, I do so much better with the modern figures. On another note, it's irregular games night tonight! X-Wing vs TIE until the small hours... :D

VC92: ‘Realistic’ Clone Wars Anakin Skywalker Review

Here’s a release that would be pretty much tailored for an eight-year old me. Whilst there have been several iterations of the Clone Wars Anakin, they’ve almost all been in the ‘animated’ style – an acquired taste, to be sure. This is the first figure in Hasbro’s move to release Clone Wars figures in a ‘realistic’ style, more akin to the film-based lines, and was followed by a Clone Wars-style Obi-Wan Kenobi and Ahsoka Tano. From the concept up (my friends and I used to imagine endlessly what the Clone Wars were like and how Anakin Skywalker was as a Jedi), this figure was a must-buy for the collection…

The Package

The Vintage Collection packaging is a great look for the Star Wars line, and Anakin Skywalker is no different. The Clone Wars logo from the TV series is used, but the image is a photo-realistic portrait of Hayden Christensen in Clone Wars attire against a Coruscant-esque backdrop. The Kenner logo is present on the bottom of the card, and Anakin is packed with his lightsaber and saber hilt on display. As with all European releases, the back of the card is covered by a boring multi-lingual sticker.

The Figure

Anakin Skywalker comes with 14 points of articulation, a lightsaber and a lightsaber hilt. His look is based upon the 2008 Clone Wars film, with the stylish red, blue and brown armour. He wears a four piece soft-goods skirt.

The Light Side

First of all, the figure looks very cool. Anakin’s Clone Wars armour always had a good look to it, and is a refreshing change to the usual Jedi-in-robes look. The facial sculpt resembles Hayden Christensen enough to pass (although it could also be used for Edward Norton), and the lines in the armour and folds in the fabric are very well done. The proportions are spot-on, and despite the small, in-scale, feet, he can balance very well – no stand required!

The joints allow a great deal of posability, which is a massive plus point. The balance is such that the legs can be posed in an action stance whilst still standing up, which is important for an action figure. The ball-jointed shoulders are a good step forward for Hasbro – previously, we’ve seen shoulder pads restrict arm movement, but on Anakin Skywalker, the shoulder pads actually slide under the body armour, leading to a much greater degree of movement. The skirt works really well, matching the colours of the paint apps and actually being quite posable.

The Dark Side

One of the first things I noticed out of the package was that Anakin Skywalker is slightly hunched – it’s not a huge problem in most poses, but it’s there. Another half-criticism is about the points of articulation – swivel hips rather than ball-joints and the lack of upper torso articulation might be a negative to some, but in all honesty the figure has all the articulation it needs, and looks as good as it could.

One definite change I would make would be a hole in the belt to hang the lightsaber hilt from, but that’s it. There’s really not much wrong with this figure.

On Balance

This is a fine toy, and one that’s been a long time coming. Regardless of your opinions of the Clone Wars series, I’m sure that the idea of a Jedi Anakin Skywalker appeals to Star Wars fans young and old, and this time round Hasbro have nailed it. An unreserved five star figure!

*****

I Am Ready!

I already thought it would be interesting, but now I'm finding the announcement of the Sequel Trilogy just plain inspiring. Star Wars influenced and inspired me hugely growing up, and it's fair to say that without the original film series I wouldn't have the passion for film-making that I do today. I've already been at film school for over a year and was fully intending to start work in the industry afterward anyway, but Tuesday's announcement (on my birthday, no less) seals it.

I will be working in the film industry when I finish my course. And I am going to do my level best to contribute, in whatever small way, to the Star Wars sequel trilogy.

It's on! :D